There are some tips and guidelines on how to take care the dissecting microscope. In lifting up the microscope, the arm of the said instrument must be seized and the base must be held by the other hand flatly at its base and carried to the desk. Be conscious not to thrust a finger beneath the base since the stage must be accidentally pressed on. Then pick up the light with transformer next to the dissecting microscope. The user must be aware where to return the microscope and its corresponding paraphernalia and the manner that the cords were draped on the light and transformer. Never prod fingers into the base, or the mirror or the stage plate may possibly be injured. Lift up the light and held up the transformer base with one hand and light case with the other so the lamp will not drop on the floor. The wire must be properly draped by the last individual to utilize the light. Prepare microscope on top of the counter and take off the dust cover. Optical head is completely let down to decrease storage head space.

Also, stage plate is firmly tight into space. The right hand view of dissecting microscope with optical head must be completely let down. The transformer must be plugged into an electrical receptacle and the light must be plugged into the lamp. Choose an angle of lighting. In case of the top lightings, put in the lamp simply at the back of the optic head. In case of the transferred illumination from below, place the lamp into the hole of the rear of the transilluminator. On the other hand, the user or the technician that will use the dissecting microscope can prepare an ordinary illumination angle by placing the lamp into the nose clamp connected by extension scissors to the transformer. Be aware of the clamping properties at the base of the scissors and just below the nose clamp. Regulate the oculars to fit the view of the eyes. For the diopter correction, the user or the technician must focus the microscope cautiously while gazing through the right ocular with the right eye and then focus the left ocular for the left eye by regulating the left ocular. Diopter is the unit of refracting power of lenses, denoting the reciprocal of the focal length expressed in meters.

Regulate the inter-ocular gap by fine-tuning the distance between the oculars. Subsequent to the focusing of the specimen, turn the zoom dial to attain the preferred magnification. For base illumination, choose the most excellent light reflector. Otherwise, test the intense mirrored reflector for higher infiltration of thick specimens. In setting up the dissecting microscope, the optical head must be raised by means of rotating the focusing knob until the rear portion of the optical head is only on top of the arm. The cords of the various parts and paraphernalia of the microscope must be unwrapped. Be sure to check and plug the cord to the appropriate voltage of the outlet. Place the specimen and adjust the oculars of the microscope in order to focus on the specimen.
After using the microscope, the lights must be turned off, and the cords should be unplugged from the outlet. Unplug the light from the transformer. The cords must be properly wrapped and tucked in the extension arm of the microscope. The optical head of the microscope must be lowered until it almost touches the base then cover it to shield it from the dust and return to its original place or cabinet properly. More on this topic